The PERFECT COATING is a modern latex paint for interiors, developed on the basis of state-of-the-art technology and high-quality raw materials, and characterised by a very good coverage rate. The paint forms durable matt coating of high resistance to abrasion and repeated washing. Its microporous structure allows the walls to breathe and the properly developed texture of the paint offers ease of spreading and non-splashing painting experience.
• very good coverage rate
• resistant to abrasion
• easy to apply
• non-splashing during paintwork
• highly efficient
The paint is designed for decorative and protective painting of walls and ceilings inside rooms made of cement plaster, cement/lime render, drywall, wallpaper, etc. It is a perfect solution for painting rooms in single- and multi-family buildings, as well as in rooms exposed to contamination, e.g. corridors, public access rooms, communication routes etc.
How to use
The paint should be applied on robust and durable surfaces, which are clean, dry and free from dust, grease and other substances reducing adhesion. Substrates coated with emulsion paints that offer good adhesion may simply be washed with water with a dab of painter's soap, rinsed with clean water and dried. Before applying the paint, it is recommended to prime the well-dried and seasoned substrate with the latex primer. Fresh cement and cement/lime renders should be primed after approx. 4 weeks, while gypsum renders – approx. 2 weeks after application.
Gypsum finishing coats and surfaces made of drywall must be dedusted and then primed, e.g. using the Fixgrunt or Akryl G.
It is important to make sure that the surface does not leave any white dust when rubbed by hand. While painting walls previously covered with wallpaper, it is important to thoroughly remove the residues of glue, e.g. using water and painter’s soap, and allow to dry completely. Areas contaminated with mould or fungi should be cleaned mechanically and disinfected using the Biotox Total algicide and fungicide.
Immediately before use, the paint should be thoroughly mixed and, depending on the painting technique applied, diluted with water in the amount of not more than 2%.
The paint may be applied with a brush, roller or hydrodynamic spraying device. The substrate and ambient temperature during application should range between +10°C to +25°C. Application of the paint is possible after at least two hours from priming the substrate (for the air and substrate temperature of approx. 20°C and relative air humidity of 55±5%). If necessary, the second coat should be applied after the first layer has dried, i.e. after at least two hours. Immediately after painting, the tools should be washed with water. The paint acquires its full resistance properties (to washing/abrasion) after at least 28 days from the completion of the paintwork.
The PERFECT COATING latex paint should be applied at substrate and ambient temperatures of +10oC to +25oC, avoiding direct sunlight during both the application and drying of the paint.
brush, roller, spray
10 - 12 m2 /l
min. 2 hours
Number of layers
1-2 depending on the desired effect
Application of a Second Coat
min. after 2-3 hours
resistant to scrubbing
2,5L | 10L
Dilution/Cleaning of the tools
- KT Farba Perfekcyjne Krycie.pdf
- Atest Higieniczny PERFEKCYJNE KRYCIE FGC.PDF
- Atest radiacyjny.pdf
- Badania dermatologiczne PERFEKCYJNE KRYCIE FGC.PDF
- Badania mikrobiologiczne PERFEKCYJNE KRYCIE FGC.PDF
- Certyfikat Jakości Wyrobu PERFEKCYJNE KRYCIE FGC.PDF
- Certyfikat Zgodności Wyrobu - Farba lateksowa PERFEKCYJNE KRYCIE.pdf