LIMESTONE STUCCO

Check price LIMESTONE STUCCO

Francesco GUARDI limestone stucco is an exclusive decorative coating inspired by antique plastering methods. It is a perfect imitation of polished stone with a rubble structure. It was designed for exteriors and modern interiors (coupled with metal and glass), also good for antique retro style interiors.

 

Available colours [ 24 ]

kolory - LIMESTONE STUCCO
 - kolor

BEIGE

kolory - LIMESTONE STUCCO
 - kolor

ROSSO SALMONE

kolory - LIMESTONE STUCCO
 - kolor

CREMOSO

kolory - LIMESTONE STUCCO
 - kolor

ZAFFERANO

kolory - LIMESTONE STUCCO
 - kolor

GIALLO MELONE

kolory - LIMESTONE STUCCO
 - kolor

BEIGE SCURO

kolory - LIMESTONE STUCCO
 - kolor

NOCCIOLA

kolory - LIMESTONE STUCCO
 - kolor

PAGLIA

kolory - LIMESTONE STUCCO
 - kolor

PESCA

kolory - LIMESTONE STUCCO
 - kolor

PICCIONI

kolory - LIMESTONE STUCCO
 - kolor

BIANCO

kolory - LIMESTONE STUCCO
 - kolor

PISELLO

kolory - LIMESTONE STUCCO
 - kolor

ROSATO

kolory - LIMESTONE STUCCO
 - kolor

GRIGIO SETA

kolory - LIMESTONE STUCCO
 - kolor

BLU PASTELLO

kolory - LIMESTONE STUCCO
 - kolor

VERDERAME

kolory - LIMESTONE STUCCO
 - kolor

GRIGIO GALLASTRO

kolory - LIMESTONE STUCCO
 - kolor

ROSA

kolory - LIMESTONE STUCCO
 - kolor

GRIGIO TOPO

kolory - LIMESTONE STUCCO
 - kolor

GRIGIO BEIGE

kolory - LIMESTONE STUCCO
 - kolor

GRIGIO CEMENTO

kolory - LIMESTONE STUCCO
 - kolor

VERDE MUSCHIO

kolory - LIMESTONE STUCCO
 - kolor

ANTRACITE

kolory - LIMESTONE STUCCO
 - kolor

NERO

Application method

spatula, venetian trowel

Number of coats

3 or more, depending on the desired effect

Coverage

2 – 5 m2/l

Drying time

24 hours

Thinner

water

Cleaning tools

water

Colour scheme

pearl base coat + 10 colours from Francesco GUARDI collection
non-standard colours

Storage

in sealed containers at temperatures from 5°C to +35°C

  1. SUBSTRATE PREPARATION

     

    GUARDI limestone stucco should be applied on robust, durable and level substrates. The substrate must be clean, dry and free from dust, grease and other substances that reduce adhesion. Before applying the stucco, prime the substrate after drying and seasoning with latex primer GUARDI, and in the case of external application, with GUARDI priming agent. Prime the fresh cement and cement-lime plasters after approx. 4 weeks and gypsum plasters after approx. 2 weeks after plastering. The finish coat and surfaces made of drywall must be dedusted and then primed, e.g. using Akryl G. The surface should not leave any white dust when rubbed by hand. If necessary, use Akryl G primer twice and then prime with GUARDI latex primer after an appropriate period. Walls with wallpaper: thoroughly remove the wallpaper and wash away glue with soap and water, and allow to dry completely. Remove mechanically spots of mould or fungi and then disinfect using Biotox Total algae and fungicide. Stucco may be applied after the priming coat has dried, i.e. after at least 6 hours from the end of priming provided that optimum drying conditions were provided (temperature +20°C, humidity 60%).


  2. APPLICATION METHOD

    Use INOX Venetian trowel to apply the first layer of stucco with uniform thickness on a dry, primed surface. Apply the product on a smooth surface. Repeat this operation on small areas, moving in different directions until the entire surface has been covered.

    Start applying the second coat after at least six hours. Collect the excess product by moving the clean edge of the trowel along the surface. Wait for the second layer to dry (min. 6 hours), and then apply the third, thinnest coat. Smooth out the third coat until the “zero” level has been reached. While the third layer is drying, i.e. after approx. 10 minutes from application, make the stucco “shiny” by moving the sharp edge of the trowel several times over the stucco’s surface. The trowel’s edge must be kept absolutely clean during this operation.

    For extra protection and deeper colour, apply Francesco GUARDI wax after approx. 7 days. Put a small amount of wax on the edge of the trowel and distribute evenly a thin coat over approx. 0.5 m2, then polish with a soft cloth, e.g. flannel or use a car polisher. Using the wax produces a sheen and darkens the colour. 

     

  3. ADDITIONAL INFORMATION

    Apply Francesco GUARDI limestone stucco at substrate and ambient temperatures from +5°C to +25°C, avoiding direct sunlight on coated surfaces both during application and drying. In the case of external applications outside the premises, protect the freshly applied stucco from rain for 2 to 3 days after application. A light or dark hue of the Francesco GUARDI limestone stucco is characteristic for this product and does not constitute a problem with quality. It is not recommended to apply stucco on substrates made of pressed cement. Before applying the wax on the whole surface we recommend that it should be tried on a small area first.

USEFUL PRODUCTS

Export Department
rafal.gabzdyl@lakma.com
tel.: +48 33-852-67-79
+48 603-192-173
Lakma SAT Sp. z o.o.
43-300 Cieszyn
ul. Frysztacka 173
tel.: +48 33 852-66-01
fax.: +48 33-852-66-03